Need a system inspected or installed? 01905 412838 sales@adsafeinstallations.co.uk

Testing and inspection

Safety line, ladder and guardrail inspection

A system nobody has checked is a liability, not a safeguard. We inspect and recertify fall protection whoever installed it. Every visit ends with a photographed report, a tagged system and the next due date on your asset register.

AdSafe engineer pull testing an anchor fixing with a calibrated pull tester reading 3.0 kN
3.0 kN Pull test on an anchor fixing with a calibrated pull tester.
AdSafe engineers in branded t-shirts on a digital testing training course
Trained The whole team on a manufacturer-led digital testing course.

Digital testing, recorded as it happens

All our engineers are trained in the latest digital testing. Pull tests on anchors and fixings, and torque checks on bolted connections, use calibrated digital gauges that send each reading straight to our reporting app. Nothing is written down by hand and copied up later.

  • Every reading is logged with the date, time and location of the test
  • Results are linked to the anchor or component they belong to
  • Your report is built from the recorded data, ready to keep for audits

Safety line and anchor inspection

  • Posts, fixings, cable tension and end anchors
  • Travellers, energy absorbers and signage
  • Pull testing of anchor points where required

StandardsBS EN 795 and BS 7883:2019. Inspected at intervals of no more than 12 months.

Fixed ladder inspection

  • Stiles, rungs, cages, hoops and stand-off brackets
  • Fixings into the building and landing platforms
  • Gates, fall arrest rails and anti-climb guards

StandardsBS 4211, PUWER 1998 and the Work at Height Regulations 2005.

Guardrail and walkway inspection

  • Free-standing and fixed guardrail, toe boards and gates
  • Counterweights, clamps and joints
  • Walkways, step-overs and rooflight covers

StandardsBS EN ISO 14122-3, manufacturer requirements and the Work at Height Regulations 2005.

  1. Send your site listWe group inspections by region so travel costs stay low.
  2. Inspect and testEvery component is checked against the manufacturer’s requirements.
  3. Report and tagPass, conditional pass or fail for each item, with photos, and the system is tagged on site.
  4. Fix and remindWe quote any remedials and contact you before the next inspection is due.
Book an inspection
Call 01905 412838

Need a system inspected or installed?

Send us the site address and what you need, or call and speak to an engineer.

Get a free quote
Call 01905 412838